Implementasi Kontrol PID pada Mesin Pengembang Roti

Novianti Yuliarmas, Siti Aisyah, Handri Toar

Abstract


Besides the ingredient composition, another important thing in the process of making dough is proofing, ie. dough rising process prior to roasting process. Proofing process requires a stable temperature to ensure that the dough is well rising. The purpose of this research is to make a proofing machine that uses DHT11 as a temperature sensor. Proportional-Integral-Derivative (PID) controller is implemented to guarantee that the machine remains at the temperature of 350Celcius, in which the fermentation process would success. PID control has been implemented in fluorescent lamp which been set its dim light to generate heat until it reach a predetermined set point value. The temperature was monitored using LCD and set to remain stable with the help of fan. The proofing process will last for 15 minutes which ended by the sound of the buzzer. The testing result shows that the value of , , will reach set point value within 120 seconds.


Keywords


kendali PID, kendali suhu, proofing

Full Text:

PDF

References


Calvel, Raymond. “The taste of bread”. Gaithersburg, Md: Aspen Publishers, p. 31, 2001.

Rahman H., Rahman F., Harun-Or-rashid. “Stability Improvement of Power System By Using SVC With PID Controller”, International Journal of Emerging Technology and Advanced Engineering, Volume 2, Issue 7, July 2012.

Salem F.A, “New Efficient Modelbased Pid Design Method”, European Scientific Journal, Vol.9, No.15, May 2013.

Sreeraj P V., “Design and Implementation of PID Controller with Lead Compensator for Thermal Process”, International Journal of Computer Applications (0975 – 8887), Volume 67, No.1, April 2013.

Nurhadi, Imam and Puspita, “ Rancang Bangun Mesin Penetas Telur Otomatis Berbasis Mikrokontroler ATMega8 Menggunakan Sensor SHT11”. Fakultas Teknik, Sains dan Matematika, Politeknik Elektronika Negeri Surabaya, 2009.

Handoko Yosua, “Pengaruh penambahan Ekstrak Bayam (Amaranthus tricolor L.), Waktu Dan Suhu Proofing Terhadap Karakteristik Adonan Dan Roti Kukus”, Buku Skripsi, Fakultas Teknologi Pangan, Universitas Katolik Soegijapranata, 2014.

Sofyan. (view June 04, 2014). Tips Memilih dan Menggunakan Heater. [Online]. Available: www.iptech.wordpress.com

Ogata, Katsuhiko, “Modern Control Engineering”, Fourth Edition, Prentice-Hall, Inc.United States of America, 2002.

Wicaksono Guntur, “Kontrol PID pada robot Barelang 3.1,” Buku Tugas Akhir Diploma III, Jurusan Teknik Elektro, Politeknik Negeri Batam, 2012.

Hindayanti Heni, “Sistem Kontrol Pemanas Ruangan Tanpa Carrier Fluids”, Buku Skripsi, Fakultas MIPA, Universitas Sebelas Maret, 2008.

Aubin Caesar Ramadhan, “Pengendali Otomatis Pada Inkubator Untuk Ayam Menggunakan Arduino Berbasis SMS”, Universitas Gunadarma, 2014.

Lukmanul Hakim, “Rancang Bangun Sistem Pengaturan Penerangan Ruangan Berbasis Mikrokontroler”, Jurusan Teknik Elektro, Politeknik Elektronika Negeri Surabaya, 2011.

Supriyono, Didik, ” Rancang Bangun Pengontrol Suhu Dan Kelembaban Udara Pada Penetas Telur Ayam Berbasis Arduino Mega 2560 Dilengkapi UPS”, Buku Skripsi Thesis, Universitas Muhammadiyah Surakarta, 2014.




DOI: https://doi.org/10.17529/jre.v11i3.2304

Refbacks

  • There are currently no refbacks.


View My Stats