Integrasi Model Pembangkit Listrik Tenaga Angin Pada Analisis Aliran Daya Sistem Tenaga

Rudy Gianto

Abstract


This paper proposes a new method for modeling and integrating wind turbine generating system (WTGS) into power flow analysis. The proposed WTGS model is based on the slip calculation of the WTGS induction generator. Unlike some previous methods where machine slip is determined after the iteration process has been completed, in the proposed method, machine slip is included in the calculation or iteration process and computed together with other electrical quantities. In this way, the formulation for induction generator rotor voltage (which is
usually complicated and often represented by bi-quadratic equation) is no longer needed in the modeling. Validation results show that the proposed method is accurate. The application of the WTGS model in load flow analysis of the multi-bus electric power system is also presented. In addition, the effect of WTGS installation on system steady-state performance is also investigated in this paper.


Keywords


wind power plant; load flow analysis; power system; induction generator; slip

Full Text:

PDF

References


Eminoglu, U., Dursun, B., dan Hocaoglu, M.H.,“Incorporation of New Wind Turbine Generating System Model into Distribution Systems Load Flow Analysis,” Wind Energy, vol. 12, pp. 375-390, 2009.

Castro, L.M., et al.,“A Unified Approach for the Solution of Power Flows in Electric Power Systems Including Wind Farms,” Electric Power Systems Research, vol. 81, pp. 1859-1865, 2011.

Feijoo, A., Pazos, J.L dan Villanueva, D.,“Conventional Asynchronous Wind Turbine Models – Mathematical Expressions for the Load Flow Analysis,” International Journal of Energy Engineering , vol. 3, no. 6, pp. 269-278, 2013.

Feijoo, A. dan Villanueva, D.,“A PQ Model for Asynchronous Machines Based on Rotor Voltage Calculation,” IEEE Trans. Energy Conversion, vol. 31, no. 2, pp. 813-814, 2016.

Feijoo, A. dan Villanueva, D.,“Correction to ‘A PQ Model for Asynchronous Machines Based on Rotor Voltage Calculation,” IEEE Trans. Energy Conversion, vol. 31, no. 3, pp. 1228-1228, 2016.

Ozturk, O, Balci, M.E. dan Hocaoglu, M.H., “A New Wind Turbine Generating System Model for Balanced and Unbalanced Distribution Systems Load Flow Analysis,” Applied Sciences, vol. 8, no. 4, pp. 502-518, 2018.

Haque, M.H.,“Incorporation of Fixed Speed Wind Farms in Power Flow Analysis”, IET Renewable Power Generation Conference (RPC 2013).

Haque, M.H.,“Evaluation of Power Flow Solutions with Fixed Speed Wind Turbine Generating Systems,” Energy Conversion and Management, vol. 79, pp. 511-518, 2014.

Wang, J., Huang, C. dan Zobaa, A.F.,“Multiple-Node Models of Asynchronous Wind Turbines in Wind Farms for Load Flow Analysis,” Electric Power Components and Systems, vol. 44, no. 2, pp. 135-141, 2015.

Haque, M.H.,“Incorporation of Fixed Speed Wind Turbine Generators in Load Flow Analysis of Distribution Systems,” International Journal of Renewable Energy Technology, vol. 6, no. 4, pp. 317-324, 2015.

Gianto, R., dan Khwee, K.H., “A New Method for Load Flow Solution of Electric Power Distribution System,” International Review of Electrical Engineering, vol. 11, no. 5, pp. 535-541, 2016.

Ackermann, T., Wind Power in Power Systems, John Wiley & Sons. Ltd., England, 2005.

Anaya-Lara, O., et al., Wind Energy Generation: Modelling and Control, 2009, John Wiley & Sons. Ltd., England.

Patel, M.R., Wind and Solar Power Systems, CRC Press LLC, Florida, 1999.

Pai, M.A., Computer Techniques in Power System Analysis, Tata McGraw- Hill Publishing Co. Ltd., New Delhi, 1984.




DOI: https://doi.org/10.17529/jre.v16i3.15935

Refbacks

  • There are currently no refbacks.


View My Stats

 

Creative Commons License

Jurnal Rekayasa Elektrika (JRE) is published under license of a Creative Commons Attribution-ShareAlike 4.0 International License.