Perintah Kontrol Gerak Kursi Roda Elektrik Menggunakan Sensor Elektromiograf

Arizal Mujibtamala Nanda Imron, Wahyu Muldayani, Sumardi Sumardi


Paralysis is a disease that can limit the mobility of the sufferer. One solution that can help people with paralysis in carrying out their mobility is the use of an electric wheelchair. In this study, an electric wheelchair with specifications where the wheelchair motion control uses muscles on both arms, so that the electric wheelchair is very suitable for patients with paralysis in the legs and weak hand strength in turning the wheels from the wheelchair. The input of motion control commands is carried out through an electromyograph sensor mounted on the flexor muscle in both patients’ arms. The output of each sensor is given a threshold of 2 volts to distinguish control commands or not. When the sensor output is more than the same as the threshold, it is considered logic one and the other is considered logic zero. The method is used to interpret the output as a control command by impulse detection. The electric wheelchair movement that can be done is forward, turn right, and turn left.


Kursi roda elektrik; Elektromiograf

Full Text:



Choi,, “A New, Human-Centered Wheelchair System Controlled By The EMG Signal”, Prosiding Seminar International Joint on Neural Network, pp. 4664-4671, Vancouver, Juli 2006.

Hardiansyah,, “The Electric Wheelchair Control Using Electromyography Sensor Of Arm Muscle”, International Conference on Information & Communication Technology and Systems (ICTS), 2016

H. Kawamoto, Suwoong Lee, S. Kanbe and Y. Sankai, "Power assist method for HAL-3 using EMG-based feedback controller," SMC'03 Conference Proceedings. 2003 IEEE International Conference on Systems, Man and Cybernetics. Conference Theme - System Security and Assurance (Cat. No.03CH37483), Washington, DC, 2003, pp. 1648-1653 vol.2.

C.Ishii, R. Konishi, “A Control of Electric Wheelchair Using an EMG Based on Degree of Muscular Activity”, Euromicro Conference on Digital System Design, 2016.

S.Sathish, ” Control of Robotic Wheel Chair using EMG Signals for Paralysed Persons”, Indian Journal of Science and Technology, Vol 9(1), DOI: 10.17485/ijst/2016/v9i1/85726, 2016.

G.Jang, “EMG-based Continuous Control Method for Electric Wheelchair”, International Conference on Intelligent Robots and Systems, 2014.

G.Jang, “EMG-Based Continuous Control Scheme with Simple Classifier for Electric-Powered Wheelchair”, IEEE Transactions On Industrial Electronics, 2015.

F.H. Tyastuti, “Classification of EMG Signal on Arm Muscle Motion Using Special Fourier Transformation to Control Electric Wheelchair”, International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation, 2017.

Falih, Adi Dwi Irwan,, “Classification of EMG Signals from forearm Muscles As Automatic Control Using Naive Bayes”, International Seminar on Intelligent Technology and Its Application, 2017.

Mahendran, Rampriya, “EMG Signal based Control of an Intelligent Wheelchair”, International Conference on Communication and Signal Processing, India, 2014

Imron, AMN. Realisasi Kontrol Hirarki Untuk Pengaturan Kecepatan Kursi Roda Elektrik Berdasarkan Subject Intension Menggunakan Bioelectrical Impedance,” Prosiding SENIATI, 2016.



  • There are currently no refbacks.

View My Stats